|
09-25-2010, 05:40 AM
|
#1
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
Torq 'n Go Lug Nuts - Update
Since installing the Torq 'N Go Lug Nuts, we have traveled over 1200 miles without a problem. These nuts hold their torque. I've purposely checked them every 100 miles or so and they remain torqued at 120 foot-pounds.
I stopped at Dexter when we went through Elkhart so that the engineers could check the installation to see if the nuts were crushing the steel wheels (I have two aluminum wheels on one side and two steel wheels on the other). They had mentioned to me by e-mail that there could be a possibility that since the lug nuts torque so positively, they might "crush" the steel. They inspected my wheels and found no crushing. They sent me off with a "have a good time traveling." Which we will with another worrisome thing off our minds.
Orv
|
|
|
09-25-2010, 02:51 PM
|
#2
|
Montana Fan
Join Date: Aug 2006
Location: cottam
Posts: 318
M.O.C. #6133
|
glad to hear they are doing what they are suppost to do.i am going to change over to them on my next upgrade on the trailer.
|
|
|
09-26-2010, 05:28 PM
|
#3
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,530
M.O.C. #2471
|
Good info....thanks Orv.
r,
Jack
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
10-01-2010, 01:31 PM
|
#4
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Orv, are these holding up as far as looks? No rusting from being nicked during installation? As I'm sure you know that's a common problem with the oem nuts, ours included.
|
|
|
10-02-2010, 01:48 AM
|
#5
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
Quote:
quote:Originally posted by sreigle
Orv, are these holding up as far as looks? No rusting from being nicked during installation? As I'm sure you know that's a common problem with the oem nuts, ours included.
|
Steve, so far they still look like new.
Orv
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|