Inverter Newbie

[RHPahls]

I just purchased a Montana 3231CK. I was shown the on/off switch on the inverter in the basement. And also the Green LED /Switch in the control panel area. I can turn the inverter on and off at both locations, but I get no 115 volts.
The Panel on the inverter blinks between 13.6 and 000.

Is there another switch I need to activate to get the AC voltage?

Thanks In Advance
Bob Pahls

[AZ Traveler]

Bob,

Welcome to the forum! Not real familiar with your model but someone that is should come along.

You should have a disconnect switch between your batteries and the inverter - check to make sure it is connected.

[DutchmenSport]

There is a power button on the inverter itself. Is it turned on?

Do you know what make / model the inverter is? Can you share.

[RHPahls]

Yes, the inverter is connected and powered on. Showing DC voltage properly.
I half remember our "guide" flipping 2 switches in the internal control panel area??

[PhilC]

If it’s like my 1000w inverter the receptacle on it is a GFCI and it may be tripped