|
11-22-2009, 03:57 PM
|
#1
|
Established Member
Join Date: Sep 2009
Location: marshall
Posts: 17
M.O.C. #9736
|
how to weigh total truck and rv
When we were returning from a trip, we had the thought to check our total weight at a truck scale but we weren't sure how it worked. We thought that it may be an electronic number flashed but that didn't happen so we moved on without ever talking to anyone at the scales.
What do we have to do to be weighed and what experiences has anyone had? Do the scale operators have a problem with that?
Thanks
Connie
|
|
|
11-22-2009, 04:01 PM
|
#2
|
Montana Master
Join Date: May 2003
Location: New Bern
Posts: 4,295
M.O.C. #311
|
The scales I used talked me onto the scales (truck and trailer). I then pulled off and paided the $8.oo for weight. Next I went back to the trailer parking area, [s]dropped[/s] unhooked the trailer and weighed just the truck. I paid $1.oo more for the reweigh within 24 hours.
If you need the formulas for figuring all the weights let us know.
Good luck and welcome to the forum.
|
|
|
11-22-2009, 04:21 PM
|
#3
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
It depends on the scale and the operator. Most times you must check in with the scale operator to discuss what you want weighed and what it will cost and they will give you instructions on what to do. The scale numbers show up where the operator sits and that's how they make their money. But again, other scales may differ.
There are scales that work other ways, for example, truckers know the procedure and how to do it themselves.
The best thing to do, is check with the place and see what they allow. Some scales do not even allow "RVers" so check first, THEN drive onto the scales after getting approval.
I have heard of H. John Kohl's procedure which is quite common but I have not done that. I use a scale up the street from where I live, at a moving company. They used their scales to measure moving trucks before and after loads are picked up to weigh a customers goods in order to determine cost of moving them. This particular place allow RVers' rigs, but I am required to go check in with the operator to discuss the weights I want (for example, each axle, gross weights or combined weights). They then direct me to the scales, I drive to each position we agreed to, count to 3 (the operator notes the weight), then move to the next position. After the last measurement, I park and get the results from the operator on a piece of paper. This costs me $10 for the whole thing. If I want each certified weight, then it's $10 for each weight measurement. Since I don't need certified weights, I just do all the weights on a scratch piece of paper provided by the operator for $10.
Your scale may differ.
|
|
|
11-22-2009, 06:50 PM
|
#4
|
Montana Master
Join Date: Sep 2008
Location:
Posts: 560
M.O.C. #8818
|
In Oregon, when the truck scales are "closed" anyone can pull in and weigh to their hearts content. The display is outside in front of the scale so you can easily see it. If it's not too busy, you can jockey around and weigh each side, single wheels, etc. ....for free!
|
|
|
11-23-2009, 03:59 AM
|
#5
|
Montana Fan
Join Date: Jul 2009
Location: Livingston
Posts: 431
M.O.C. #9442
|
Quote:
quote:Originally posted by KTManiac
In Oregon, when the truck scales are "closed" anyone can pull in and weigh to their hearts content.
|
We often are in Oregon. We've wondered if we could weigh on their scales when they were closed, but were never sure about it. Next time we go through we'll weigh and say to ourselves, "Thanks KTmaniac!" Great info.
|
|
|
11-23-2009, 04:32 AM
|
#6
|
Montana Master
Join Date: Apr 2009
Location: Ardrossan
Posts: 729
M.O.C. #9261
|
All Government scales here in Alberta are there to be used with no fee and you can weigh anytime as long as you are not interupting trucks that may be lined up or are waiting to be weighed. These scales are in Kgs so can be confusing at times to convert to pounds. We use this service all the time when we travel and is easy to weigh one axle at a time or even each wheel if you have the time and the scales are not busy.
|
|
|
11-24-2009, 05:03 PM
|
#7
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,532
M.O.C. #2471
|
Quote:
quote:Originally posted by KTManiac
In Oregon, when the truck scales are "closed" anyone can pull in and weigh to their hearts content. The display is outside in front of the scale so you can easily see it. If it's not too busy, you can jockey around and weigh each side, single wheels, etc. ....for free!
|
KT,
That's one of the things we like about going through Oregon. They even have scales that have been closed "forever" that we stop at regularly. The only thing I ever wonder about is when they were last calibrated.
Jack
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
11-25-2009, 01:06 AM
|
#8
|
Montana Master
Join Date: Aug 2007
Location: Waterford
Posts: 3,693
M.O.C. #7500
|
At the 2009 Fall Rally in Goshen, Indiana, there was a man named Walter from Recreation Vehicle Safety Education Foundation (mouthful!) who weighed each individual wheel of both the tow vehicle and the trailer. Then after setting up camp, you drove back to get the tow vehicle weighed again. The service isn't cheap ($49) when compared to public scales, but gives a much more detailed report of your weights. For example, weighing just the axles could indicate you are withing specs, but weighing at the wheel could show you are over loaded on that wheel and under on the opposite side - something that seems to be common in Montana trailers, from what Walter said. I got the impression he travels from gathering to gathering to provide this service. If desired, you can contact him at:
Walter Cannon
staff@rvsafety.com
321-453-7673
|
|
|
11-25-2009, 04:52 AM
|
#9
|
Montana Master
Join Date: Jan 2008
Location: Portland
Posts: 1,107
M.O.C. #8045
|
I weigh at the closed ones in Washington also. In BC just before you cross the border at the truck crossing on the Canada side there is one just for checking your weight. I use it often.
|
|
|
11-25-2009, 05:38 AM
|
#10
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
RVSEF is at most major rallies. I was surprised to see them at our small rally. They had been at the rally before us and we were the in between time till the next one. We have seen them at other rallies we attend. They do a in depth weighing the way it should be done to get all the proper numbers and get the picture of your weight conditions... It can be a eye opening experience. The service center now weighs units when they are in for service and go over the numbers with you. That can also be a throat clutcher..
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|