No hot water - Suburban 10 DE
It worked OK on gas for the last few weekends, plenty of hot water and a nice clean blue flame. (I've never tried it on electric alone.) Yesterday it stopped heating the water. Plenty of gas but it wouldn't light off. I have a rocker type "ON-OFF" switch that has an internal red light when ON. There's a little red LED next to it that (I believe) stays illuminated when the igniter is firing. That little light doesn't illuminate any more.
I checked all the connections, circut breakers and fuses and they're all OK. I went out to the heater, removed the door and turned the electric switch to ON. After a few hours, still no hot water.
The owner's manual is of no help, and I'm out of ideas. Anything I've missed? Anything else I could check? It's a new Montana 3400RL.
All I can think of is that the circut board is bad.
Norm
'03 Silverado 2500HD Dmax/Allison XCab LB 4wd
Prodigy
'04 Montana 3400RL
Reese Pro 15,000
'03 2500HD D/A LB Ex Cab
Montana 3400 RL
Reese Pro 15K
Prodigy
|