|
|
03-29-2019, 02:55 PM
|
#61
|
Established Member
Join Date: Feb 2019
Location: Daphne
Posts: 24
M.O.C. #23516
|
May I suggest Face time or both using Bluetooth earbud. When my wife and I went for the first time we didn’t even know how to dump the tanks, thank you YouTube ! Good luck.
|
|
|
03-29-2019, 05:35 PM
|
#62
|
Montana Fan
Join Date: Jul 2017
Location: Where ever we park
Posts: 201
M.O.C. #20273
|
I hitched our TT's and now our Monty by myself. I find it easier and less distraction then trying to look at the wife and listen to her on a the phone. I first get in front of the rig, make sure I can see down both sides of it with my mirrors, make sure I'm straight, and then slowly proceed to back up to it. I get out and look (G.O.A.L), and lined up with the kingpin. If I'm not sure, or something doesn't look right, get out and maybe readjust if needed. After a few times, he'll be hooking up by himself in no time. Happy camping!!
__________________
Mike
2016 Chevy CC DRW Duramax
2019 Montana 3700LK
|
|
|
03-30-2019, 01:40 PM
|
#63
|
Montana Fan
Join Date: May 2015
Location: Livermore
Posts: 492
M.O.C. #17391
|
This thread is so funny. Everyone has a different opinion about this. 4 pages on weather or not to help your husband or not. What does he say is the question I have LOL
|
|
|
04-05-2019, 11:00 AM
|
#64
|
Established Member
Join Date: Apr 2013
Location: Saint Helens
Posts: 27
M.O.C. #13381
|
I'll add my 2 cents to this also. Maybe this has happened to others, I wouldn't mind knowing, but while hooking up once in AZ, I did as always backed into the jaws and it went clunk. The handle closed as usual, I put in the safety pin (B&W Companion) and got everything all ready to go. Wife, check, dog, check, walk around to check all slides and jacks were fully retracted and in, check. In the truck, put it in gear, give it a little gas and KLUNK, WHAT THE HELL!!! The pin was OUTSIDE the jaws. Tailgate trashed, fiver sitting on the bed rails, and half of the park standing around. OH, the embarrassment and shame! Long story short, made it home ok and a little over $1700.00 later (new tailgate) I learned to VISUALLY check every time that the pin is truly locked in place. I think when I backed in, the alignment wasn't quite straight on and I hit one side of the jaws and caused it to close correctly, but fooled me. We all learn lessons the hard way sometimes.
__________________
2018 Chevy High Country, Crew Cab, Duramax, DRW
2013 3582RL, MoRyde suspension, Disc Brakes, Goodyear 614 tires, B&W Companion Puck System Hitch
|
|
|
04-05-2019, 11:07 AM
|
#65
|
Montana Fan
Join Date: Jan 2019
Location: Sun City
Posts: 408
M.O.C. #23256
|
Always check twice and trust those "little feelings" that you get. Back when I drove a semi, I was dropping a trailer off. I got out, disconnected the fifth wheel pin, disconnected the electric and glad hands, got in and was starting to pull out from under the trailer, when I thought, "Are you sure you lowered the landing gear on the trailer?" Got out, looked, and sure enough, I hadn't! That was a close one!
__________________
Dave in AZ
2008 Montana 3400RL
2008 Dodge Ram 3500 Diesel Dually
|
|
|
04-05-2019, 11:35 AM
|
#66
|
Established Member
Join Date: Sep 2016
Location: Ludington
Posts: 30
M.O.C. #19072
|
Unsure how to help my husband hitch up
Quote:
Originally Posted by Mike_Garcia
I'll add my 2 cents to this also. Maybe this has happened to others, I wouldn't mind knowing, but while hooking up once in AZ, I did as always backed into the jaws and it went clunk. The handle closed as usual, I put in the safety pin (B&W Companion) and got everything all ready to go. Wife, check, dog, check, walk around to check all slides and jacks were fully retracted and in, check. In the truck, put it in gear, give it a little gas and KLUNK, WHAT THE HELL!!! The pin was OUTSIDE the jaws. Tailgate trashed, fiver sitting on the bed rails, and half of the park standing around. OH, the embarrassment and shame! Long story short, made it home ok and a little over $1700.00 later (new tailgate) I learned to VISUALLY check every time that the pin is truly locked in place. I think when I backed in, the alignment wasn't quite straight on and I hit one side of the jaws and caused it to close correctly, but fooled me. We all learn lessons the hard way sometimes.
|
That happened to us once. Cost $8k for repairs! We painted our jaws bright yellow and always use a flash light now to see if the jaws close, even if the handle goes down.
|
|
|
04-05-2019, 11:42 AM
|
#67
|
Gone Traveling
Join Date: Sep 2012
Location: ALBUQUERQUE
Posts: 248
M.O.C. #12840
|
Ditto on painting the jaws so it easy to see if it has closed COMPLETELY.
|
|
|
04-05-2019, 12:51 PM
|
#68
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
It happens.In our case whoever is backing into the jaws, usually the wife, one of us is actually looking at the the hitch to visually observe the pin is locked into the jaws.
|
|
|
04-05-2019, 02:49 PM
|
#69
|
Established Member
Join Date: Feb 2019
Location: vacaville
Posts: 49
M.O.C. #23409
|
Hi everyone who responded to my question about hooking up the 5th wheel. I am amazed at all the responses with helpful hints. This has really helped me. We take our first long trip tomorrow. I feel better able to assist him if needed.
Thank you everyone for the advice. This is wonderful forum and the wealth of information is unbelievable. Hope to meet some of you on the road. Thanks again. Terri
|
|
|
04-05-2019, 07:17 PM
|
#70
|
Montana Fan
Join Date: Feb 2019
Location: Tupelo
Posts: 101
M.O.C. #23524
|
Quote:
Originally Posted by Mike_Garcia
I'll add my 2 cents to this also. Maybe this has happened to others, I wouldn't mind knowing, but while hooking up once in AZ, I did as always backed into the jaws and it went clunk. The handle closed as usual, I put in the safety pin (B&W Companion) and got everything all ready to go. Wife, check, dog, check, walk around to check all slides and jacks were fully retracted and in, check. In the truck, put it in gear, give it a little gas and KLUNK, WHAT THE HELL!!! The pin was OUTSIDE the jaws. Tailgate trashed, fiver sitting on the bed rails, and half of the park standing around. OH, the embarrassment and shame! Long story short, made it home ok and a little over $1700.00 later (new tailgate) I learned to VISUALLY check every time that the pin is truly locked in place. I think when I backed in, the alignment wasn't quite straight on and I hit one side of the jaws and caused it to close correctly, but fooled me. We all learn lessons the hard way sometimes.
|
Caught a similar issue before catastrophe, so know it can happen. Similar situation with a Curt hitch. Pin wasn't low enough because we were hitching with the truck on a decline and hitch lowered a couple inches just backing up the last couple feet after I thought I had it perfect. Everything clicked, but it just didn't quite latch in. The bottom of the pin was in the jaws and not below the jaws. The Curt system is pretty fool proof if you check it close. But if I would have been in a hurry or didn't have that, "this didn't sound right" feeling, I could have easily missed it.
I had another camper tell me he got a hundred feet down the driveway one time when it fell apart on him.
We've learned to keep in mind whether we're hooking up level or not and make darn sure the hitch pin is slightly lower than you think it should be. We check the jaws and pin and we always do a slow/short test pull with the trailer brakes engaged.
__________________
Dave and Deb
Enjoying Retirement
2016 GMC 3500 Duramax Dually
2017 Montana 3731FL
|
|
|
04-06-2019, 06:19 AM
|
#71
|
Montana Fan
Join Date: Oct 2017
Location: Riverview
Posts: 178
M.O.C. #20713
|
My story is opposite from everyone else. Our maiden trip to a local campground; landing gear down, raised the monty just a bit off the truck. Hitch jaws wouldn't release the king pin. lowered & raised the monty, pulling & backing the truck. I thought the front landing jacks were going to bend. We decided to drive 2 hrs back to Camping World. We were afraid maybe the Monty would come loose during our drive back. CW tech sprayed lubricant on the jaws, working perfect. embarrassing situation, but a learning experience. Simple fix that newbies like us didn't know. We now spray the heck out of the hitch, catch plate, king pin, etc.
__________________
traded 2016 Montana and 2016 2500 RAM mega cab for
2020 Gulf Stream Conquest Class C on
Ford E-450 frame
Toad: 2017 Jeep Wrangler
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|