 |
06-23-2008, 12:35 PM
|
#1
|
|
Montana Master
Join Date: Jul 2007
Location: Galena
Posts: 989
M.O.C. #7380
|
LR Slide Squeak on Open/Closing
When we open or close the LR slide there is squeaking. How do I elimate this problem. Can I use graphic grease on the gears as a solution. I do not want to cause another problem with grease on carpet. Bought our Montana used, have had it 1 year, has always made this noise. Is this normal?
|
|
|
|
06-23-2008, 12:59 PM
|
#2
|
|
Montana Master
Join Date: Apr 2007
Location: South Shore
Posts: 6,009
M.O.C. #7110
|
Ours don’t have the squeak as you mentioned but I would suggest using some slide lubricant which can be gotten at Wal-Mart (I think) and spray the part of the frame underneath that slides in and out. Just avoid spraying where you think it may cause a problem getting on the carpet.
__________________
2011 GMC 4X4 dually CC, 6.6 Duramax with Allison Transmission. Formally 2001 Montana,2007 3400RL Montana, presently 2018 3401RS Alpine.
|
|
|
|
|
06-23-2008, 01:01 PM
|
#3
|
|
Montana Master
Join Date: Oct 2007
Location: silver creek
Posts: 1,507
M.O.C. #7770
|
open the slide and lube the shaft that runs horizontally and also the rack gears.they do make a spray lube for this,but for now try some WD40 It should have no effect on your carpet,
|
|
|
|
|
06-23-2008, 01:04 PM
|
#4
|
|
Montana Master
Join Date: Jun 2006
Location: Grand Blanc
Posts: 2,508
M.O.C. #5965
|
The white slide "dry" lube does not mark the carpet, does not attract dirt like WD-40 and stopped our squeeks when used. You might get all the slides done at the same time.
|
|
|
|
|
06-23-2008, 02:16 PM
|
#5
|
|
Montana Master
Join Date: Aug 2006
Location: Lone Tree
Posts: 5,615
M.O.C. #6109
|
All of ours squeeked so bad they could shatter glass! I think it was mostly from being transported in the winter through all the magnesium chloride used on the roads here in the midwest. It turns everything to rust overnight.
I tried every lube I could think of - white lithium, dry slide grease from Camping World, WD-40, graphite - nothing worked. The squeeks finally stopped when I stopped trying to fix it. Not sure what changed.
|
|
|
|
|
06-23-2008, 02:54 PM
|
#6
|
|
Montana Master
Join Date: Nov 2007
Location: Kville
Posts: 2,865
M.O.C. #7871
|
Quote:
quote:Originally posted by boylanag
The white slide "dry" lube does not mark the carpet, does not attract dirt like WD-40 and stopped our squeeks when used. You might get all the slides done at the same time.
|
Those noises are really hard to stop. I use silicone on the rubber and dry lube on the mechanisms...as noted the dry lube will not attract crude like WD40.
|
|
|
|
|
06-23-2008, 04:49 PM
|
#7
|
|
Montana Master
Join Date: Oct 2007
Location: Land O Lakes
Posts: 2,751
M.O.C. #7753
|
We had that problem in the Navy with a lot of our gear, we figured it was caused by Minahoonies. But as soon as we gave up and ignored it they went away and no more squeaks. Apparently Minahoonies don't like to be ignored and they go away. I guess they have left the Navy equipment and moved to the RVs. So I guess the remedy is to just ignore them and if they aren't too noisy eventually they will go away.  ... Dave
|
|
|
|
|
06-24-2008, 08:37 AM
|
#8
|
|
Montana Master
Join Date: Jan 2006
Location: South
Posts: 2,499
M.O.C. #5140
|
We use this:
http://www.corrosionx.com/marine.html
Doesn't attract dirt and works very well.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
