3160

[Dam Worker]

Torque for eight bolt wheels with 13/16" lug nuts and not 7/8" so I assume that I have 1/2" studs and the correct torque is 110/120 foot pounds. Seven thousand pound axels. Does this sound correct. I already looked at the manual and online. Everything depended on size of stud which I could not get to very easily.

Thanks in advance.

Just want to get the correct amount after putting on the new 637's. Going for a quick weekend trip.

Tom Marty

[jcurtis934]

Yep and do thr torque per pattern listed. John

[DQDick]

Yes, I do mine to 120.

[Dam Worker]

Thanks for your help and yes I did the sequence and pattern. Tires barely got warm with temps in the mid 70's. Got up into the Blue Mountains and stopped to get sandwiches out of fridge and temp was around 40. Tires were cold.will retorque tomorrow.

Tom Marty