|
04-27-2020, 04:39 PM
|
#1
|
New Member
Join Date: Apr 2020
Location: Grundy Center
Posts: 8
M.O.C. #26165
|
Control panel
Just got out of storage. Ac/furnace climate control panel not lit. Checked fuses, circuit breakers, fuse on the ceiling unit, all are good. Any other ideas before buying new control.
|
|
|
04-27-2020, 04:59 PM
|
#2
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 838
M.O.C. #20949
|
If this is a Dometic CCC2 multi zone digital thermostat it gets its 12 volt power on the 4 Wire telephone cable plugged into the backside of thermostat. Remove thermostat and verify if Red and Black wires have 12 Vdc using a multi meter..
If power is present on the cable then thermostat is bad
|
|
|
04-27-2020, 05:58 PM
|
#3
|
New Member
Join Date: Apr 2020
Location: Grundy Center
Posts: 8
M.O.C. #26165
|
No power on the red & blk
|
|
|
04-27-2020, 06:49 PM
|
#4
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 838
M.O.C. #20949
|
If you have no 12 VDC on red and black leads of telephone cable you removed from thermostat then you have one of the following issues...
.. verify main coach batteries are charged and disconnect is not turned off
.. the CCC2 thermostat gets its 12 Vdc power from Zone 1 air conditioner control module mounted on the roof under its cover
... if main battery power is good then you can verify if you have 12 VDC present at electronic control module for Zone 1
Remove Zone 1 cover and locate control module and measure for 12 VDC power at connections I’ve circled in yellow..
If you have 12 volts at these two terminals on control module then either the RJ11 connection from control module to CCC2 thermostat needs reseating or you have a break in that comm cable running from Zone 1 control board down the thermostat
|
|
|
04-27-2020, 07:42 PM
|
#5
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,690
M.O.C. #12947
|
The location on the circuit board in the box below the A/C where the phone cable plugs in from the thermostat can also be a problem if it corroded. This was ours about six years ago, and a replacement solved the issue. Why it was corroded so bad was never discovered, but it is still working just fine. So, if no other obvious issues are located, give this a try.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
04-27-2020, 08:02 PM
|
#6
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 838
M.O.C. #20949
|
Gateway board
|
|
|
04-27-2020, 08:31 PM
|
#7
|
New Member
Join Date: Apr 2020
Location: Grundy Center
Posts: 8
M.O.C. #26165
|
Thanks, I’ll check this weekend. Storms tomorrow & part time work til Sat.
|
|
|
05-08-2020, 08:38 PM
|
#8
|
New Member
Join Date: Apr 2020
Location: Grundy Center
Posts: 8
M.O.C. #26165
|
Now guess a rodent got to wiring. Any idea how the wiring goes from battery to ac or how to follow the wiring?
|
|
|
05-13-2020, 08:26 PM
|
#9
|
Established Member
Join Date: Dec 2011
Location: Nampa
Posts: 22
M.O.C. #12044
|
Buy or borrow a toner. Ideal has one for about a hundred dollars. Hook up to wire and follow it right thru walls. Can test for broken and shorted wire also
|
|
|
05-27-2020, 07:26 PM
|
#10
|
New Member
Join Date: Apr 2020
Location: Grundy Center
Posts: 8
M.O.C. #26165
|
Appears power coming into one end of power box but 12v not exiting. Checked fuse bank. No power to a/c fuse, also there are 2 kitchen fuses. Power to one fuse, but not the other. Circuit board does not appear damaged nor any corrosion.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 11:41 AM.