Hitch

[Kevinaroosky]

I’m buying the 2020 Montana High Country 385BR. It has the road armor pin box. My existing 5th wheel hitch in my 2015 Chevy 2500 Duramax has a PullRite super lite 20K. Will these 2 work in conjunction with one another.

[CADman_KS]

Originally Posted by Kevinaroosky

I’m buying the 2020 Montana High Country 385BR. It has the road armor pin box. My existing 5th wheel hitch in my 2015 Chevy 2500 Duramax has a PullRite super lite 20K. Will these 2 work in conjunction with one another.

Yes, but you will need a new capture plate, obviously for your new pinbox...

[Kevinaroosky]

I actually have the capture plate that attaches to the trailer that fits into my PullRite hitch. Is that what you’re talking about?

[CADman_KS]

Originally Posted by Kevinaroosky

I actually have the capture plate that attaches to the trailer that fits into my PullRite hitch. Is that what you’re talking about?

Yes. I assumed that you knew that you needed to have one for the new hitch, but just wanted to make sure. The Road Armor pinbox and the Pullrite are compatible...

[DQDick]

Over the last two years, at the national rally, I've been shocked at the number of folks who junked the Road armor pin box and bought a new Morryde one. Just mentioning it so, if you aren't happy with the combo, you don't think it's the hitch.

[mhs4771]

Just a couple of points: The Road Armor Pin Box was originally sold by Lippert as the RotoFlex Pin Box and there have been reports of the Rubber Block in there has shifted position and had to be hammered back into place.
Several years ago there was a group of us at our SOB Rally that changed out the Lippert Tri-Glide Pin Box (an expensive option) for the MORryde Pin Box. Shortly after that Lippert discontinued the Tri-Glides when they began failing.
The MORryde Pin Box has been around for years while Lippert keeps trying to build a better Mouse Trap and generally failing after a period of Trial and Error,