|
10-31-2010, 04:51 AM
|
#1
|
Montana Master
Join Date: Feb 2007
Location: Winfield
Posts: 7,327
M.O.C. #6846
|
You have got to see this
I was doing some research for Captain Joe regarding the manner in which our satellite installation was wired into the rig. I figured it would be beneficial to take a couple of pictures of the wiring run so I took the basement panels off which had the wiring runs behind them. Warning, this is not a view for the faint of heart or for those who may have anxiety attacks as a result of gaining some knowledge of what actually goes on in those regions of the rig which are hidden from view. The first picture shows the view directly behind the convenience center. This is beneath the desk and contains the water pump as well as the wiring to and from the breaker and fuse panel. And to think I was considering putting the Autoformer here originally:
The next view is looking down the basement from the convenience center and shows the primary wiring run that includes the controls in the entryway coat closet (slides, pumps, lights, water heater, etc.) as well as the wiring coming out of the desk area from the breaker/fuse panel. It is amazing the amount of wiring that is hidden out of view that controls those things we take for granted!!
If anyone has any questions, please feel free to contact Keystone-Montana Customer Service (Kidding!!!)
Bingo
__________________
Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.
|
|
|
10-31-2010, 05:16 AM
|
#2
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
It's not just Keystone, though you might expect better wiring management in something you pay that much money for
Looks like they skipped the part in RV building school - Wiring Harness 101. I've actually been slowly cleaning up and inspecting the wiring in mine and checking for wire/water line chafing. When I installed my EMS I used zip ties and did the job right. Thanks for the scary pictures on Halloween!
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
10-31-2010, 05:27 AM
|
#3
|
Montana Master
Join Date: Sep 2010
Location: Hollister
Posts: 1,043
M.O.C. #10764
|
Wow....saved those photos for future use. And to think that the water pump is located adjacent to the fuse panel.
|
|
|
10-31-2010, 06:25 AM
|
#4
|
Montana Master
Join Date: Jun 2009
Location: Sioux Falls
Posts: 617
M.O.C. #9380
|
Please don't take this as a knock on Keystone because I think this kind of thing is truly an industry problem. When I took the factory tour I couldn't help but think that for a 'mature' industry I was looking at amateur hour in terms of modern manufacturing practices.
The RV industry has been around for a long, long time. Go to the museum when you get to Elkhart. For some reason this is an industry that has never consolidated. There are hundreds of brands out there. Keystone has dozens all by themselves. And, if you back off of your 'favorites' for a bit you have to admit that there is just not much difference between them all. It seems to me that each brand is operating fairly independently when it comes to mfg. and each is more like an operation that remains more like a garage/home shop than a modern operation.
Here's an example. I've learned from folks in the automobile industry that wire lengths are computed and harnessed to accuracies less than an inch. Look at the wasted loops of wire in the photos. The loops add weight, power loss, and opportunities for abrasion that are inconsistent with the goals I would think are part of designing and building an RV.
My suspicion is that the industry might be uniquely an American one so far. It's never been run through the intensity of foreign competition eating their market share. None of the manufacturers have enough volume (by themselves) to go on a hunt for ways to save pennies on wire like car manufacturers do.
It's an industry ripe to be consumed by some aggressive competitor.
|
|
|
10-31-2010, 10:15 AM
|
#5
|
Montana Master
Join Date: Apr 2007
Location: South Shore
Posts: 6,009
M.O.C. #7110
|
I would not have expected to have seen that. At least you know the space isn’t totally wasted.
__________________
2011 GMC 4X4 dually CC, 6.6 Duramax with Allison Transmission. Formally 2001 Montana,2007 3400RL Montana, presently 2018 3401RS Alpine.
|
|
|
10-31-2010, 01:04 PM
|
#6
|
Montana Master
Join Date: Sep 2006
Location: Casa Grande
Posts: 5,369
M.O.C. #6333
|
MY EYES, MY EYES, MY EYES!!!!!!!!!!! A great scene from an episode of Friends........
|
|
|
10-31-2010, 05:10 PM
|
#7
|
Montana Master
Join Date: Nov 2003
Location: Santa Fe Springs
Posts: 4,189
M.O.C. #639
|
Thats why they wont give you a blue print or skezmatic of the electrical wiring system for any Keystone product, there is none.
__________________
Pulling a 2004, 2980 RL an oldie but goodie.
Tow vehicle is a 2009 RED RAM 3500 DRW.
|
|
|
11-01-2010, 01:04 AM
|
#8
|
Seasoned Camper
Join Date: Nov 2008
Location: Sheffield
Posts: 74
M.O.C. #8921
|
They all look like that no matter who the manufacture is. You won't see any diffrent until you get into the million dollar coaches.
|
|
|
11-01-2010, 01:49 AM
|
#9
|
Montana Master
Join Date: Aug 2007
Location: Waterford
Posts: 3,693
M.O.C. #7500
|
Quote:
quote:Originally posted by pbahlin
Please don't take this as a knock on Keystone because I think this kind of thing is truly an industry problem. When I took the factory tour I couldn't help but think that for a 'mature' industry I was looking at amateur hour in terms of modern manufacturing practices.
The RV industry has been around for a long, long time. Go to the museum when you get to Elkhart. For some reason this is an industry that has never consolidated. There are hundreds of brands out there. Keystone has dozens all by themselves. And, if you back off of your 'favorites' for a bit you have to admit that there is just not much difference between them all. It seems to me that each brand is operating fairly independently when it comes to mfg. and each is more like an operation that remains more like a garage/home shop than a modern operation.
Here's an example. I've learned from folks in the automobile industry that wire lengths are computed and harnessed to accuracies less than an inch. Look at the wasted loops of wire in the photos. The loops add weight, power loss, and opportunities for abrasion that are inconsistent with the goals I would think are part of designing and building an RV.
My suspicion is that the industry might be uniquely an American one so far. It's never been run through the intensity of foreign competition eating their market share. None of the manufacturers have enough volume (by themselves) to go on a hunt for ways to save pennies on wire like car manufacturers do.
It's an industry ripe to be consumed by some aggressive competitor.
|
On the surface, I agree it looks apparent that the RV industry could take a lesson from the autos, but in reality, it's economy of scale. The autos make more of a specific model in a week than Montana makes all of it's various sized units in a year. Therefore pre-made wiring harnesses are not only a cost savings but a must. With the relatively small number of units Montana makes, I'm betting it would add significant cost to design and have wiring harnesses pre-made.
Of course none of this excuses the fact that an extra 10 minutes spent while the existing wire are completely exposed in the unit could make this mess a lot more presentable.
|
|
|
11-01-2010, 02:32 AM
|
#10
|
Montana Fan
Join Date: Apr 2009
Location: Antioch
Posts: 148
M.O.C. #9267
|
Proper wire dressing would add only a few extra hours to the manufacturing time of these trailers. Maybe $60 to $100 extra cost in a $50,000 trailer.However there are no competitors that do it and most buyers will never see the difference so most executives would not give a darn. The American auto industry and also Electronics industry were forced to improve their quality by the Japanese who were taught by an American- W. Edwards Deming
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|