|
|
07-15-2007, 02:19 PM
|
#1
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Cam Position Sensor
Wow! I hardly had time to move to the side of the road! Thankfully I was not towing and there was no traffic and I just eased the truck to the side of the road. Let me tell you that is scary! One second everything is fine and you're motoring down the road. Next second the engine is simply not running.
This happened yesterday on my way home from my granddaughter's birthday party. So I called triple A and out comes the tow truck. Got the rig home and called my brother. He came down this morning and changed out the CPS for me. Cranked up first time after the exchange. If you have not purchased a spare one of these little guys then do so ASAP. I called around to find one and the first place I called said they could order one for me for a mere $151.00! I told them I'd look around a little more. Next place had one for only $32.00. Thanks to all the good info here on the MOC I knew to look for the lower price.
As stated by others here on the MOC it is a rather straight forward exchange. And we are up and running with a minimum of discomfort thanks to all the good folks here on the MOC.
HamRad
|
|
|
07-15-2007, 03:11 PM
|
#2
|
Montana Master
Join Date: Oct 2004
Location: Sulphur Springs
Posts: 748
M.O.C. #2220
|
To add something here. The absolute taletale that it is the cam sensor is that the tach imediately falls to zero rather than follow the engine down. When you crank the engine over the tach will read cranking RPM if it does not move it is the CPS assuming your tach is working.
|
|
|
07-15-2007, 04:59 PM
|
#3
|
Montana Master
Join Date: Jan 2005
Location: Cooper
Posts: 1,230
M.O.C. #3029
|
Mine died while waiting for a red light to change but the engine re-fired and I was able to get it to a shop for replacement before it quit again.
|
|
|
07-15-2007, 05:06 PM
|
#4
|
Montana Master
Join Date: Nov 2002
Location: Midlothian
Posts: 956
M.O.C. #40
|
Denis,
I recently ordered one to keep as a spare for $15.29. Here is the website http://catalog.powerstrokeshop.com/p...83&catalogid=0 if you want to order another spare.
They also have fuel filters for $15.
|
|
|
07-15-2007, 05:46 PM
|
#5
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,532
M.O.C. #2471
|
Dennis,
Just curious, how many miles on the truck when the CPS went out?
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
07-15-2007, 08:56 PM
|
#6
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Thanks for the various comments. I did not think to look at the tach. But the engine would NOT start. It would turn over but nothing would happen.
Jackel1959 we have right at 65K on the truck.
You can bet that I'll be carrying a spare one from now on. Can't imagine being out in the middle of a trip and have this sort of thing happen.
Awaywego thank for the link for replacement parts. I'll probably order a couple.
HamRad
|
|
|
07-16-2007, 03:08 AM
|
#7
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Dennis, I'm sorry to hear about the problem but glad to hear everything worked out safely.
Trukdoc, or maybe someone else knows the answer to this question. I've heard of the cps being a weak point on the 7.3. But what about other engines. Should those of us with other engines being buying a spare, also? Mine probably has its own weak points, something other than the cps.
|
|
|
07-16-2007, 03:29 AM
|
#8
|
Montana Master
Join Date: Sep 2003
Location: Forestville
Posts: 6,025
M.O.C. #496
|
Dennis, It was good to hear that you got to the side of the road and your repair was quick. How did you know what the problem was? Is it just a Ford thing? How difficult was it to change? And on another note how is the new grandson doing?
|
|
|
07-16-2007, 07:41 AM
|
#9
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
DHenry,
"How did you know what the problem was?"
From what I had read on the MOC Forum I immediately suspected the CPS. And if I had known at the time about the info Truckdoc posted about the tach I would have known for sure. Hopefully there won't be a "next" time. I am going to carry an extra just in case. Especially now that they can be had for a much reduced price. Thanks to Awaywego for the latest location and lowest prices!
"Is it just a Ford thing?"
As far as I know it is just a Ford thing. But perhaps someone who really knows will post some info here soon.
"How difficult was it to change?"
It is not too difficult. My brother ended up on the creepy crawly under the truck. Took him about 10 to 15 minutes. It is pretty straight forward. It is located right at the front of the engine.
And the grandson, Cooper, is doing great! growing like a weed. And the granddaughter, Kaylene, is adjusting pretty well. I think she enjoys being "big sister". Take care.
Dennis and Mary Kay
|
|
|
07-16-2007, 09:51 AM
|
#10
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
I think it's a 7.3L Ford problem rather than Ford diesel in general, right?
|
|
|
07-16-2007, 10:48 AM
|
#11
|
Seasoned Camper
Join Date: Jun 2007
Location: South Prairie
Posts: 60
M.O.C. #7274
|
CPS is the ackeleas heal(sp) for the t444e aka power stroke... I believe each engine has it own... the Cummins there is an issue with the fuel pump, D-Max a sensor on the fuel rail... I truly recommend to all who take the time to look at this forum get involved with a forum specific to your tow rig. There is a wealth of information out there. My personal recommendations are:
As far as changing the cps on a 7.3... you will need a 10 mm wrench.. socket is normally to large to fit. there is a single 2 wire connector, the CPS is located to the left of the crankshaft at about the 10 or 11 o'clock position. It can only come out and go in one way... check E-bay for a decent price...
Ford Guys:
http://www.superdutydiesel.com/
http://nwforddiesel.com/
Dodge Guys
http://www.nwbombers.com/
GM guys
http://oilburners.net/
http://www.dieselplace.com/forum/
|
|
|
07-16-2007, 11:02 AM
|
#12
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Thanks for the links, Frankenstein. I do monitor a couple of forums for my brand but was not aware of this one.
|
|
|
07-16-2007, 12:01 PM
|
#13
|
Montana Fan
Join Date: May 2003
Location: Ottawa Lake
Posts: 307
M.O.C. #321
|
Mine would not start at the dump station yesterday, and I noticed the wait to start light did not come one so I'm wondering glow plug relay or CPS. Any thoughts? Thanks Roman,
|
|
|
07-16-2007, 12:06 PM
|
#14
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
OK, you gear heads, hep us non gear heads out.
Where is this critter, and how hard is it to change out????
The under-hood looks like a foreign country to the Ozzman......
Thanks, Ozz
(I did read the previous posts, but would appreciate further hep..)
|
|
|
07-16-2007, 12:10 PM
|
#15
|
Montana Master
Join Date: Aug 2005
Location: Manassas
Posts: 562
M.O.C. #4327
|
The spare CPS was the first thing I bought when I got my truck after reading about it at the DieselStop.com forum. I keep it in the glove compartment.
|
|
|
07-16-2007, 12:53 PM
|
#16
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Ozz,
If you check back on page one toward the bottom you will find out all about the location and the "how to change" .
ON EDIT.... Sorry Ozz I did not see that you had already read the previous posts. My brother did the work for me so I never saw the actual change out. But I believe there are two bolts holding the device. Simply remove the bolts and pull out the CPS. My brother had to pry it out using a med. size pry bar. It must fit very snugly because he had to work to push the new one back in. I think it is mostly a matter of just getting the proper angle to work it in. Elapsed time about 15 minutes..... after finding exactly where it was located. Probably took a couple of minutes to actually find it.
Glass Guy,
I noticed that at first the glow plug indicator did not come on. But after sitting for a while it did. In my case the engine would turn over as if it was going to start but would not. As indicated in an earlier post check out the tach. If it is not indicating a reading then that is a perfect indicator that it is the CPS.
HamRad
|
|
|
07-16-2007, 01:07 PM
|
#17
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
OZZ: I don't think you'll have a CPS problem with your Sick-O, but for inquiring minds ... on a 7.3 looking from above the radiator there is a serpentine belt pulley right off the A/C bracket ... looking almost straight down, above and to the left of the harmonic balancer you'll see the CPS. From below the radiator, you'll see it on the passenger side somewhat above the timing pointer off the harmonic balancer. As stated .. piece of cake to change with a 10 MM socket / ratchet / extension combo. Remove 2 wire connector ... 1 bolt removes the fork retainer ... sensor pulls straight out. Little oil on the O-Ring on the new sensor ... reverse order to install.
Remember when most of us carried a new set of points and a condenser in our gloveboxes??? IMHO other than the inconvenience of 15 minutes of your time ... it's really a non issue unless you don't have a spare in your glovebox. Like mentioned above, all engines have their little quirks.
|
|
|
07-16-2007, 02:31 PM
|
#18
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Thanks, guys. I will have a spare, and this thread in the glove compartment.
|
|
|
07-16-2007, 02:35 PM
|
#19
|
Montana Master
Join Date: Feb 2004
Location: Cumming
Posts: 2,820
M.O.C. #919
|
Thanks for the link. I just ordered one. I have 95K on my 7.3 without a hiccup! Guess I'm due, so now I'll have one in the glove box.
|
|
|
07-16-2007, 02:36 PM
|
#20
|
Montana Master
Join Date: Aug 2006
Location: Lone Tree
Posts: 5,615
M.O.C. #6109
|
Ozz - Like dieselguy says, not sure it's an issue on the 6.0. We have to carry extra pistons and stuff in the glovebox.
Reminds me of the HEI GMC ignition systems. Always carried a spare distributor cap as it would fail for no reason anywhere anytime anyplace it felt like it. Easy five minute fix but could be costly as heck if you weren't prepared.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|