|
|
05-14-2024, 09:33 PM
|
#1
|
New Member
Join Date: May 2024
Location: Hanna City
Posts: 2
M.O.C. #34318
|
Help me before i set it on fire!!!!
I have Montana Big sky I believe it's a 1999. My plug-ins aren't working I changed the GFI main plug. Half of them worked then they stopped and only my GFI PLUG WORKS. My main vent fan is stripped and wouldn't shut off so I disconnected it, was wondering if there are replacement parts. can you tell me what circuit b breakers should be used what amps?
|
|
|
05-15-2024, 12:04 AM
|
#2
|
Montana Master
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,571
M.O.C. #23668
|
Welcome aboard! Hopefully we can help get past the frustrations. Do you have the trailer plugged into a GFI outlet? If so try a non-GFI outlet. Sometimes the GFI's in the trailer don't play nicely when the main source is also GFI.
What's stripped on the vent fan? The fan blade shaft? A little Google research should find you some parts or a full vent replacement.
I'm not sure where you'd find the breakers on a 1999. Hopefully someone can point us in the right direction.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana HC 305RL / HW Progressive EMS
2015 RAM 3500 Laramie Longhorn Crew Cab 4x4 DRW / Demco Recon Hitch on RAM Puck Ball
|
|
|
05-15-2024, 12:06 AM
|
#3
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,690
M.O.C. #4831
|
Welcome to the MOC!!!
OK, it sounds like you have a number of problems/issues. Let's try to break them down a bit.
Quote:
Originally Posted by bamschopshop@gmail.com
I have Montana Big sky I believe it's a 1999.
|
The model number would help figure out your floor plan which may aid in a resolution. A 1999 seems to be kinda old for a Big Sky. The first I recall was 2002 but it could have een earlier.
Quote:
My plug-ins aren't working I changed the GFI main plug. Half of them worked then they stopped and only my GFI PLUG WORKS.
|
Can you expand on this? Were all the plugs non-functional or just the ones on the GFCI circuit? You then changed the GFCI (was it in the bathroom?) and half of the GFCCI controlled plugs worked for a bit. Now only the GFCI plug works and none of the other GFCI circuits? Is this correct?
If yes, there is power to the main GFCI outlet. Use a VOM to ensure there is power to the downstream circuit. You then have to trace where the next GFCI outlet is located. Usually the bathroom is the main GFCI and it goes to the bedroom side. The basement GFCI outlet, the exterior outlet and the kitchen outlet can appear in any order. Pulling all the GFCIs to check the power in and out is required. A toner to follow the wiring helps a lot.
How about the non-GFCI plugs. Do they work? Or are they all dead too?
Quote:
My main vent fan is stripped and wouldn't shut off so I disconnected it, was wondering if there are replacement parts.
|
Is the vent lid lift that is stripped? There are replacement parts assuming you can find the Manufacturer name and model. It is on the fan assembly. As old as this RV is you may be easier to just replace it with a new one. The opening is a standard size
Quote:
can you tell me what circuit b breakers should be used what amps?
|
The 120V AC side uses 15 and 20 breakers. 20 amp CBs are used for A./C and washer/dryers (perhaps a microwave?)
The 12V DC side is pretty much 15 amp fuses.
Do you have pictures of the power center with CBs and fuses?
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
05-15-2024, 09:22 AM
|
#4
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
A picture of your main circuit breakers would help also. Up to around 2002/2003 they used a 30 amp single pole breaker and a 20 single pole breaker for the two legs of the 50 amp service. Then they changed to a 50 amp two pole linked breaker for the 50 amp service.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-15-2024, 09:52 AM
|
#5
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,670
M.O.C. #2283
|
You have Carl and Bill on this two of the best. They will solve your problems.
Lynwood
|
|
|
05-15-2024, 08:23 PM
|
#6
|
New Member
Join Date: May 2024
Location: Hanna City
Posts: 2
M.O.C. #34318
|
I will be at the camp ground this weekend i will get pictures to show you you have know idea how happy i am to find this help!!!!!!!!!!
|
|
|
05-20-2024, 12:56 PM
|
#7
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
I'm asking on this thread in the hope that one of you who's already posted a response to the OP can answer me quickly:
I have a 2002 3670RL. There are three slides--one of which contains a kitchen-ish counter, a microwave above the counter, and a light fixture above the counter. The light fixture is not one of the plastic ones which I think can be powered by the battery--it's nice, with a glass cover and a push-on switch on the side. I know the 2002 models are weird, electrically--does anyone know whether power to this light fixture, in the slide above the counter next to the microwave, would be shut off with a breaker, or shut off by pulling a fuse?
|
|
|
05-20-2024, 02:01 PM
|
#8
|
Seasoned Camper
Join Date: Aug 2022
Location: southern
Posts: 77
M.O.C. #31539
|
Quote:
Originally Posted by newowneroldmontana
I'm asking on this thread in the hope that one of you who's already posted a response to the OP can answer me quickly:
I have a 2002 3670RL. There are three slides--one of which contains a kitchen-ish counter, a microwave above the counter, and a light fixture above the counter. The light fixture is not one of the plastic ones which I think can be powered by the battery--it's nice, with a glass cover and a push-on switch on the side. I know the 2002 models are weird, electrically--does anyone know whether power to this light fixture, in the slide above the counter next to the microwave, would be shut off with a breaker, or shut off by pulling a fuse?
|
If it's 12 volt, then it will be a fuse.
__________________
2011 Montana Mountaineer 295RKD
2005 Ram 3500 Dually
|
|
|
05-20-2024, 02:11 PM
|
#9
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by ScottnSue
If it's 12 volt, then it will be a fuse.
|
Thank you for your response. How can I tell whether or not it's 12 volt?
|
|
|
05-20-2024, 02:39 PM
|
#10
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
To be sure you need to remove the glass cover and check the bulb. It should have the voltage marked on it.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-20-2024, 02:46 PM
|
#11
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by BB_TX
To be sure you need to remove the glass cover and check the bulb. It should have the voltage marked on it.
|
Okay, thank you!
|
|
|
05-20-2024, 03:21 PM
|
#12
|
Montana Master
Join Date: Jan 2018
Location: Granger TX
Posts: 2,594
M.O.C. #21044
|
Quote:
Originally Posted by newowneroldmontana
I have a 2002 3670RL. There are three slides--one of which contains a kitchen-ish counter, a microwave above the counter, and a light fixture above the counter. The light fixture is not one of the plastic ones which I think can be powered by the battery--it's nice, with a glass cover and a push-on switch on the side. I know the 2002 models are weird, electrically--does anyone know whether power to this light fixture, in the slide above the counter next to the microwave, would be shut off with a breaker, or shut off by pulling a fuse?
|
This is a screen shot of your 2002 model from a sales video. The light I circled looks to be a 110v light to me.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
05-20-2024, 04:12 PM
|
#13
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by Mikendebbie
This is a screen shot of your 2002 model from a sales video. The light I circled looks to be a 110v light to me.
|
Thank you so much! Yes, that's exactly my camper, and exactly the light I'm talking about.
|
|
|
05-20-2024, 04:30 PM
|
#14
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 3,038
M.O.C. #5651
|
Just disconnect from 30/50 amp connection and if it still works it is 12V.
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
05-20-2024, 04:48 PM
|
#15
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by twindman
Just disconnect from 30/50 amp connection and if it still works it is 12V.
|
Thanks-- but I'm pretty sure it's a 110 volt. I'm trying to avoid shutting everything down right now, even for a little bit, because my electricity situation is precarious and I don't want to screw anything up by messing with it. I need the air conditioner if I'm going to be in my camper right now. My breakers are rather cryptically labeled, but I think I can figure out which breaker goes to the light without having to mess with the air conditioner.
|
|
|
05-27-2024, 06:42 PM
|
#16
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Yup, that light is a 110 volt. I had thought the problem would not recur--but today it suddenly did-- --started flipping breakers--problem solved. Thanks again, everyone.
|
|
|
05-27-2024, 08:33 PM
|
#17
|
Montana Fan
Join Date: Aug 2023
Location: Antwerp or Corbin
Posts: 176
M.O.C. #33140
|
what was the problem with your light? I have the exact same model of fixture. If I don't use the switch regularly it wants to stop working. I press it a bunch of times then it acts normal. I think I probably should replace it because there must be something not quite right but as long as I use it regularly it's fine.
|
|
|
05-28-2024, 01:53 AM
|
#18
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by brycesteiner
what was the problem with your light? I have the exact same model of fixture. If I don't use the switch regularly it wants to stop working. I press it a bunch of times then it acts normal. I think I probably should replace it because there must be something not quite right but as long as I use it regularly it's fine.
|
Recently the light has started turning on on its own, and there's been a burning smell. It looks like there's been a little bit of fire within the glass covering of the fixture.
|
|
|
05-28-2024, 07:52 AM
|
#19
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
Those little pushbutton switches on those 120 vac fixtures are not high quality. Mine started acting up and I replaced the switch and it worked fine afterward. Same with my 12 vdc light fixtures.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-28-2024, 08:32 AM
|
#20
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 154
M.O.C. #19318
|
Quote:
Originally Posted by BB_TX
Those little pushbutton switches on those 120 vac fixtures are not high quality. Mine started acting up and I replaced the switch and it worked fine afterward. Same with my 12 vdc light fixtures.
|
I think I'll do that, too, or just replace the whole fixture. At this point I think it'd really be a good idea for me to check the whole electrical system on my rig--lotta glitches happening lately.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|