|
07-26-2023, 12:50 PM
|
#1
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 3,038
M.O.C. #5651
|
Awning wrinkling now
It's been very windy for 2-3 days. When awning starts bouncing a bit I retract it to about 2 feet. Somehow now when I roll it up, it starts to wrinkle near the door when it is about 2 feet out.
Any suggestions on how to get it to roll up properly?
Thanks
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
07-26-2023, 01:07 PM
|
#2
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,579
M.O.C. #30417
|
Wait for the wind to stop?
__________________
Tony & Donna & the best dog ever, Murphy.
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
07-26-2023, 09:04 PM
|
#3
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,690
M.O.C. #4831
|
It could be the awning material has slid on the roller and is no longer square to the trailer. There are older posts about this and how to correct it. Once you get it lined up, mark a line with a Sharpie where the end of the material should be on the roller Next time it is easy to know where to move the material. .
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
07-27-2023, 05:19 AM
|
#4
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
What Carl said. I had the same problem. Takes a little patience, but you can pull and tug it into position so that it is square to the frame.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
07-27-2023, 09:54 PM
|
#5
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 3,038
M.O.C. #5651
|
Strange, but I later rolled it all the way out and let it set for 30 minutes. Rolled it back in and all was well!!!
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
07-28-2023, 07:54 AM
|
#6
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,579
M.O.C. #30417
|
Quote:
Originally Posted by twindman
Strange, but I later rolled it all the way out and let it set for 30 minutes. Rolled it back in and all was well!!!
|
Mine did the same thing at Bodega bay. Retracted it during a windy night. Next morning i noticed a wrinkle. Extended it let it get some sun and retracted it. All was well.
__________________
Tony & Donna & the best dog ever, Murphy.
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
08-10-2023, 08:50 AM
|
#7
|
Montana Fan
Join Date: Dec 2022
Location: Union City
Posts: 109
M.O.C. #32153
|
I agree with all of the comments.
I strongly suggesting checking the location where the set screw for the awning material is located to ensure that it is still holding the material in place. If it is good, then you are done. If it is not, then remove the screw, pull the material back into position and replace the screw. While you are there, marking the spot, as suggested by Carl, is a very good idea. This is a very good reference if there were a future issue.
Cheers
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|