The "probes" in the tank just use resistance between the four probes sticking into the tank at different levels through any mineral content in the tank to decipher what the liquid level is in that tank. I have never seen any manufacturer part number of the probes as they are installed when the tank is manufactured. One manufacturer of the normal type probes is CP Products. Valera sells the Horst miracle probe, which has a plastic shield to keep crap of all sorts off of the probes. Again, I state, that these probes are nothing more than a glorified bolt stuck through the side of the tank. Hope this additional info helps you out with your project.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|