Hydraulic fluid down a little
I had what appeared to be water, run out under the rig about 10-12 feet from the back when I stopped after a day's driving. I thought it was the fresh tank but I only fill it 1/3 full. Anyway, it drips/slow runs out right in the middle. It just so happens there was a previous opening there and when I opened it the slide cylinder was right there. Lippert replaced 2 cylinders when the unit was almost new (at the rally).
Anyway, there was no oily residue, etc in that area. Wouldn't the fluid be kind of oily? So I checked the fluid level, and it is indeed down about 1/2 or 3/4 inch. I think in the past it was always on the line drawn at the top.
Anyway, where do I go from here?
__________________
![](image.php?s=db7e3bc1444d708f6be43225008ef497&u=5651&type=sigpic&dateline=1508620065)
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|