I've been told that the assembly for 2 wear guides requires that the tube be straightened before installing the assembly. This is due to having only the one bolt in the center, rather than the 2 bolts used on the asssembly for one wear guide. I plan to use some angle iron and a large c-clamp to do that.
Still waiting on my swap out, Lippert dropped the ball and I got ordering and installing a 3rd AC.
__________________
Rip & Beth
2021 3121RL Legacy Cobalt FBP, MORryde IS & pin box
2020 F350 PSD CCLB SRW
|