|
Bathroom light switch - 3400
It was annoying to turn on the bathroom light from the outside. At night, this lit up the bedroom. I moved the switch from the bedroom side to the inside of the bathroom. I ordered a couple of "speed wire" switches from Dyers. The single rocker switch covered the cutout for the double switch in the bedroom. Be careful when you cut the hole for the bathroom switch, as the vent pipe runs up inside the wall close to the door jamb. Locate the switch at least 4-5 inches from the door jamb. The wires are long enough to mate up with the new switch. Now we don't forget to turn the light off, and also, it doesn't disturb the person sleeping. Total cost, $19.01 for two switches and two switch plate covers.
Mel
|
Threaded Mode
