While working on a holding tank leak issue I needed water in my grey tank. Hooked up my house hose and .... behold, Nothing!
I can put water into the fresh holding tank and then my pump system supplies water just fine. All systems are go.
But darn if I can not get water to enter the coach water system thru the hose fitting. Has anyone else run into this issue?
What the heck!
--------------------------------------------------------------------------------------
FINAL UPDATE:::
Several years ago I froze a line to the outside shower head which is located on the wall just above the street water inlet. I chose to abandon the shower and simply caped both the hot and cold lines. The cold line T's off of the water inlet line (hint hint). I had some difficulty is getting the cap to seal well so I pumped a bunch of silicone caulk into the line and cap. It stopped the leak and I went on my way.
Well,
The now setup finger of caulk worked its way down the pipe and blocked the cold water inlet T fitting where the outside water feeds into the coach. Funny what sometimes comes back to haunt us.
Thanks to every one that took the time to reply.
John
Threaded Mode
