Mor/Ryde Pin Box Rubber Number?
Hello All,
I have a 2014 3150RL. MorRyde pin box. Towing with a 2012 Ram 3500 DRW. B&W hitch. Has the wrap around jaws. I am getting what I feel as chucking.
I have looked in the dust on the bottom part of the hitch and have about 1 1/4"-1 1/2" movement fore and aft. The rubber block is a #4.
Is it possible I need a #5 block? The #4 should be the one I need per the weight chart of the trailer. It is at the top limit of the weight for a #4,
I was wondering if the rubber block is too soft and the movable part of the pin box is hitting the stop blocks. I have measured and it does not look like that is the case. I could be wrong. It may be what it is.
I may be spoiled coming from a diesel pusher towing a 3,300lb Honda which you never knew was there.
Jim
__________________
2012 Ram Laramie 3500 DRW 4x4 3.73 Tow Max Pkg B&W Companion 60 gal RDS aux fuel tank. 2014 Montana 3150RL, 2 A/C's, Leather, 6 Point Jacks, Splendede WD2100XC, Mor/ryde X-Factor, Duravis 250 tires with TST 507RV monitors. 2 x Honda EU2000's
|