Power Cord LED
Hello all. On my power cord, which is a 50 AMP Furrion, I have 2 blue LED lights that turn on when plugged in. It's the same if I am on 30 AMP or 50 AMP. 1 for each HOT I believe. In storage, I leave it plugged in all winter. Today, while un hooking it to move my unit, I noticed on f the lights was out. When I got home, and plugged it in, also to a 30 AMP outlet, I noticed the 1 light was still out. I usually have both at home. So i though it might be the 50-30 AMP adapter, so I changed it. Still the same. Now, On the inside, I have the Progressive Industries surge protector, hardwired version, with the screen that scrolls the different readings and statuses. Both L1 and L2 showed voltage and an amp draw. The, I turned on thew rear AC unit , and it worked fine. I shut it down, and turned on the front and it too worked fine. I believe each AC is on a different HOT leg of he 50 AMP service. So, I ma guessing that all is well, and one of the blue LED indicator lights on my cord is bad. Does that make sense to anyone else, or has anyone else had the same issue? Anything I should check to make sure all is working well>? I am heading out for my first trip, to Tennessee next Friday and just want to be sure. thanks in advance
__________________
Ed
2016 Montana 3950 BR
2004 Montana 3650 RK
2019 Ram 3500 SRW Laramie CTD 6.7
|