|
Stiles, we lost the cover over the desk area and when it came down it"slpoded" almost like a corel plate. took my a good two hours to find all the shards and a number of band aids. The balls are on the lights over the dining room table and the sconce lights in the rear were all loose. I tightened them all and some were still coming loose so I put a bit of tef tape on them as my Loc-tite all dried up. So far so good. My guess is that your light cover may be under the slide. Try running the slide in about a foot and using a yard stick sweep underneath or try a flashlight and get your face right on the floor. I have had to change several of those "can" bulbs and if you don't pull the entire fixture down(it is on springs) and put some beef on it when you re-seat the lenses it will fall right back off. You will feel a detente as it locks back in... Dave
|
Hybrid Mode
