|
05-21-2019, 08:48 AM
|
#1
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
no 12 volt
In my 110V panel the 20 amp breaker marked low end is tripped and I have no 12v at all
|
|
|
05-21-2019, 09:04 AM
|
#2
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,727
M.O.C. #7992
|
I don't understand low end but I would guess it is the feed for your converter. Will it reset?
__________________
2006 3000RK
2009 Ram 2500
|
|
|
05-21-2019, 09:11 AM
|
#3
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
no it does not
|
|
|
05-21-2019, 09:18 AM
|
#4
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,691
M.O.C. #4831
|
Assuming the battery is good, shouldn't there be 12V even if the converter is off? Not knowing what "low end" refers to, you can unplug the converter (I think Don has a IOTA under the steps) and see if the breaker will reset. Also check the outlet to see if it has voltage or not.
This will take some investigation with a voltmeter to figure out what is going on.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
05-21-2019, 09:19 AM
|
#5
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
sorry post in wrong place. could there be something on the converter.
|
|
|
05-21-2019, 09:21 AM
|
#6
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,727
M.O.C. #7992
|
I'd start by disconnecting the battery and see if it will reset. If it doesn't find the manufacturer of your converter and see if they have some trouble shooting procedures.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
05-21-2019, 09:45 AM
|
#7
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
I unplugged the converter and the reset
|
|
|
05-21-2019, 09:50 AM
|
#8
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
As for resetting the breaker, did you first turn the breaker off then back on? And did it then trip again? You normally can't just push a tripped breaker to ON without first turning to OFF.
Oops. Looks like you did get it reset.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-21-2019, 10:15 AM
|
#9
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
yes I did then I plugged the converter in and there was a flash from the converter
|
|
|
05-21-2019, 01:55 PM
|
#10
|
Montana Master
Join Date: Jul 2010
Location: Lake Havasu City AZ.
Posts: 1,811
M.O.C. #10552
|
Just from my experience a flash is not good. Maybe a dead short?
__________________
Wayne and Ann Moore
2015 Ford F-350 King Ranch
Firestone air bags, bed saver.
Add 40 GAL tank in bed.
|
|
|
05-21-2019, 03:02 PM
|
#11
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
A flash is rarely good unless you are taking a picture.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-21-2019, 07:15 PM
|
#12
|
Montana Master
Join Date: Sep 2006
Location: Kelowna
Posts: 1,475
M.O.C. #6237
|
Replaced the converter and all seams good
|
|
|
05-29-2019, 01:36 PM
|
#13
|
Seasoned Camper
Join Date: Sep 2018
Location: Prescott
Posts: 82
M.O.C. #22749
|
Just curious Hookman did you find out what the 20 amp breaker marked low end is for?
__________________
Larry and Linda Stetz
2018 3820FK
2019 F350 Lariet DRW 14000# GVWR 6.7 Turbo Diesel
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|