|
Built my own from parts from Lowe's, all brass, cost about $55.00. Have used it for 2 years with zero problems. A lot of MOC's have done the same setup, no need to spent the $$ for SS. Parts List w/o Gauge: 1 Water Regulator Valve ¾” – Watts # 25AUB-Z3; 1 brass male hose to ¾” MIP adapter – Watts #A-665; 1 brass female hose to ¾” FIP swivel – Watts # A-661 (I used a Solid Brass fitting instead of the Swivel and think it worked better);1 brass ¾” close nipple – Watts #A-877 (I used a ¾” short nipple as the close was out of stock); Teflon thread tape.
|
Hybrid Mode
