|
|
02-15-2022, 11:31 AM
|
#1
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Snap Pads
Reading thru another thread prompted me to ask this question about "snap pads". After paying around $200 for six pads that are basically just a 1-1/8" bigger on the total circumference of a circle (rounding off the hexagon shape) ... looking back, do those of you that have bought these feel you really didn't think this purchase thru? My 6 scrap treated 2X6"'s appear to do the same intended job and "no" ... taking 2 minutes to retrieve them from my truck box is not defined as a bother to me.
|
|
|
02-15-2022, 11:32 AM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
I agree, particulary when I put handles on the end of the boards to pull them out and carry them.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
02-15-2022, 05:27 PM
|
#3
|
Established Member
Join Date: Apr 2018
Location: Shiloh
Posts: 40
M.O.C. #21545
|
I really like my Snap Pads and believe they were worth the cost. The have been on for three years.
__________________
RK & Jen
2018 3790RD
2017 F350 DRW
|
|
|
02-20-2022, 05:09 PM
|
#4
|
Established Member
Join Date: Jul 2020
Location: Knoxville
Posts: 13
M.O.C. #26665
|
Definitely worth it.
Quote:
Originally Posted by RK & Jen
I really like my Snap Pads and believe they were worth the cost. The have been on for three years.
|
Yes they are definitely worth it! I was skeptical at first until that first morning when we were packing up to leave and it was pouring down the rain. That was one less thing I had to deal with.
|
|
|
02-20-2022, 05:23 PM
|
#5
|
Montana Master
Join Date: Jan 2018
Location: Granger TX
Posts: 2,598
M.O.C. #21044
|
I recently shamed myself into cutting my scrap 2x6s to the same length - makes them all real pretty! Snap pads may be in my future.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
02-15-2022, 07:09 PM
|
#6
|
New Member
Join Date: Aug 2021
Location: La Grange
Posts: 8
M.O.C. #29470
|
I like my snap pads also.
|
|
|
02-15-2022, 07:15 PM
|
#7
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,669
M.O.C. #9969
|
At the current cost, I guess I would have to give it more thought. I bought ours very early when they were first introduced and think I paid less than $100 for all six. For long term setup I have stacked 2x12x12 that I also use, but for short term, say 1 to 5 days not really worth the bother.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
02-15-2022, 07:53 PM
|
#8
|
Montana Master
Join Date: Oct 2014
Location: Hagerstown
Posts: 906
M.O.C. #16013
|
Quote:
Originally Posted by mhs4771
At the current cost, I guess I would have to give it more thought. I bought ours very early when they were first introduced and think I paid less than $100 for all six. For long term setup I have stacked 2x12x12 that I also use, but for short term, say 1 to 5 days not really worth the bother.
|
If I paid this much for them I would say I liked them to. But at what looks like a 1/2 inch bigger foot print I `ll pass and use the Camco Extra large foot pads.
https://www.amazon.com/SnapPad-Perma...id=24191847883
https://www.amazon.com/Camco-Levelin...hvadid=4167963
__________________
2018.5 3791 Rear Den Montana, on the lake no 3rd A/C, Mini Split
Electric Brakes ..... Disk Brakes, it`s the only way
F350 Ford Dually 4:10`s w/bags (payload 5595 lbs) Sumo Springs 63 gal aux tank
Reese Goosebox Mor/Ryde SRE 4000 X Factors Monroe shocks.... real smooth ride
|
|
|
03-04-2023, 02:02 PM
|
#9
|
Established Member
Join Date: Aug 2022
Location: Orlando
Posts: 34
M.O.C. #31426
|
Any idea how much those camco fasten pads weigh compared to the snap pads or just in general?
__________________
Paul & Julie Plaugher
2021 Montana Legacy 3761FL
|
|
|
03-04-2023, 02:39 PM
|
#10
|
Montana Master
Join Date: Feb 2020
Location: Bencia
Posts: 539
M.O.C. #25828
|
Quote:
Originally Posted by TripleP
Any idea how much those camco fasten pads weigh compared to the snap pads or just in general?
|
Camco fasten pads https://www.camco.net/fasten weigh very little vs. Snap Pads.......but love not having to get the Camco pads out of storage and place them properly aligned under the jack feet. My XTRA-6 pack https://rvsnappad.com/products/xtra-6-pack cost $170 last summer.
__________________
2020 Montana 3780RL fifth wheel
2016 F-350 6.7L Diesel Crew Cab Long Bed DRW
|
|
|
02-16-2022, 03:24 AM
|
#11
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
I originally purchased mine to make setup easier. I didn't have to go to each jack and put down wood or plastic blocks and I didn't have to pick them up when we left. Just unhook, auto-level and were camping. Since then, we have been in a couple of spots where the access was at a steep angle and I had to raise the jacks pretty high. The two front jacks are at their highest setting, and the rear only have 2 bolt holes left to go up.
I made big pads out of 4x4's and 2x4's stacked to take up the space and not extend the jacks so far, so now the pads aren't as convenient as when I first got them, but I do still like having them. They protect the foot from rocks and other damage and give a softer point to set down when the site if full of gravel and other debris. They are still nice to have, but pricey.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
02-16-2022, 07:10 AM
|
#12
|
Montana Master
Join Date: Mar 2021
Location: Western NY
Posts: 548
M.O.C. #28430
|
I think that sums it up pretty well. We are new to this and i almost pushed the button twice on the snap pads, I see the attraction, but something about the price just seemed a little steep for what I was getting. I decided to make up some pads with some 3/4” plywood I had laying around. I have 4 that are 4 thicknesses and 2 that are 3 thicknesses because I was short on the plywood and didn’t want to buy any. At the current price of 3/4” plywood, the snap pads get a little cheaper. Anyway, I finished them off with straps made from some old ratchet strap material. We have a routine, she sets them down while I plug in the shore power. For what I have into them, I think we’re good.
__________________
Mark & Karen
2021 3121rl - slide toppers, cottage white, X-Factors, disc brakes, Gen-Y pinbox
2021 F-350, 6.7L, SRW CC LB - B&W Companion, Bakflip cover
|
|
|
02-16-2022, 08:32 AM
|
#13
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 3,038
M.O.C. #5651
|
I thought people had a problem with the leveling jacks hitting the ground when going over curbs, etc. So wouldn't these pads sort of make that worse?
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
02-16-2022, 01:56 PM
|
#14
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Quote:
Originally Posted by twindman
I thought people had a problem with the leveling jacks hitting the ground when going over curbs, etc. So wouldn't these pads sort of make that worse?
|
That's the very reason I didn't get a set even when the price was more reasonable.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
02-21-2022, 10:24 AM
|
#15
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Quote:
Originally Posted by WeBeFulltime
That's the very reason I didn't get a set even when the price was more reasonable.
|
We had the same thoughts. Our front jacks on occasion low to the ground uneven terrain
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
02-16-2022, 02:08 PM
|
#16
|
Seasoned Camper
Join Date: Sep 2021
Location: Negaunee
Posts: 66
M.O.C. #29769
|
I agree. They are pricey. I bought mine a while back and they are now on the second rig.
We still put our blocks underneath them.
They probably prevent the rig from sliding a little bit on pavement. Really didn't notice any big improvement as far as stability.
I do agree with what was stated earlier, " if you spend that kind of money you better like them."
If I had to do it all over again I probably wouldn't spend that kind of money on them.
|
|
|
02-16-2022, 07:21 PM
|
#17
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,774
M.O.C. #12947
|
I held off years ago from getting the pads until we were parked at a mobile home park in their small RV area that was paved, and they placed us on a side sloped spot. Across the freeway from where we were parked was a large railroad switching yard, and when they were switching cars at night, we could actually feel the rig slide a tiny bit at times. Put the pads on the rig and no more sliding. Another benefit is when we occasionally stay at a couple parks that have blacktop paving and they require blocks under the jacks to protect the blacktop, the rubber pads are good in place of wood blocks.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
02-16-2022, 09:18 PM
|
#18
|
Montana Master
Join Date: Jul 2020
Location: Battleford
Posts: 627
M.O.C. #26690
|
Quote:
Originally Posted by dieselguy
Reading thru another thread prompted me to ask this question about "snap pads". After paying around $200 for six pads that are basically just a 1-1/8" bigger on the total circumference of a circle (rounding off the hexagon shape) ... looking back, do those of you that have bought these feel you really didn't think this purchase thru? My 6 scrap treated 2X6"'s appear to do the same intended job and "no" ... taking 2 minutes to retrieve them from my truck box is not defined as a bother to me.
|
So... not sure why you started this thread? It seems you have made your choice to not buy them. Your language seems needlessly controversial... are you actually looking to learn something, or just stir the pot while you entertain yourself??
BTW, I thought the purchase through and they are much better than anything else I have tried. "basically just a 1-1/8" bigger"?? - try them if you would like to learn how they actually work; IMHO much better than you seem to think. And, no, your 2x6's do not do the same intended job.
Brad
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
|
|
|
02-17-2022, 10:21 AM
|
#19
|
Montana Master
Join Date: May 2020
Location: UPLAND
Posts: 1,284
M.O.C. #26190
|
I've really been happy with the Anderson jack blocks. The tops have powerful magnets that make attaching to the bottom of the levelers a snap and the fact they keep your leveler out of the dirt and elements by 8" is what sold me.
__________________
2019 Keystone Montana 3560RL, 2020 Chevy 2500 HD, Firestone airbags, Air Lift wireless compressor, Curt gooseneck, 20K Reese Goosebox, TST-507, USMC combat vet & retired LEO. Robert, Anika, Breanna, Dylan (daughter-in-law Stephanie). & our Great Pyrenees Layla
|
|
|
02-17-2022, 10:09 PM
|
#20
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Brad … I’ve been on the MOC several years and haven’t asked many questions unless I wanted to know something for my benefit as well as for others that are interested in my question. We all buy things and later have buyer's remorse. I wanted to know if there was any “snap pad” remorse here on the MOC. Frankly I’m satisfied with the responses from both sides.
I’ll also go as far as to beg to differ with you on what snap pads and wood do as to function. They both provide a larger foot print and they both somewhat cushion the foundation for the hydraulic rams. As for the 1-1/8” number … for conversations sake, I loped off the hexagon points and went with the advertised 9” dia for standard feet and 11” dia for “snap pads”. (Put a 9" circle squarely inside an 11" circle and what do you have all the way around ... about 1") And yes I can calculate what percentage of area that is.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|