|
|
06-05-2024, 07:14 PM
|
#21
|
Established Member
Join Date: Oct 2023
Location: Travelers Rest
Posts: 21
M.O.C. #33434
|
Update. I replaced the air pressure switch, don’t think that was the problem. I also replaced the temperature demand probe. Not sure about that. I did find one of the 5 amp fuses (there are 2 of them on the board) that was blown. I put two new ones in. Before I did all that I unplugged from shore and disconnected the battery. So I now have a constant flame but little to no hot water. There is a constant blue flame but the coils are like warm at best but could probably not quite warm either. Waiting on the two stage regulator and the electrode flam probe. A tech said there should be a green light in the board. Anyone have an idea where that is on the mother board.
|
|
|
06-06-2024, 07:55 AM
|
#22
|
Established Member
Join Date: Oct 2023
Location: Travelers Rest
Posts: 21
M.O.C. #33434
|
Ok so for some reason I had hot water in the shower and had to Temper it with cold to my likings. My wife showered this morning. She too had hot water. She did have to turn it on and off a few times and then it provided hot steady water theoughout her shower. So I guess I’ll see what happens over the next few days. Maybe I’ve fixed it????
|
|
|
07-01-2024, 11:41 AM
|
#23
|
New Member
Join Date: Jul 2024
Location: East Bridgewater
Posts: 1
M.O.C. #34511
|
Quote:
Originally Posted by ILOVEFISHINGEDISTO
Ok so for some reason I had hot water in the shower and had to Temper it with cold to my likings. My wife showered this morning. She too had hot water. She did have to turn it on and off a few times and then it provided hot steady water theoughout her shower. So I guess I’ll see what happens over the next few days. Maybe I’ve fixed it????
|
Any update on this, I am having the same issue, it runs for a bit then goes cold.
|
|
|
09-18-2024, 03:00 PM
|
#24
|
Established Member
Join Date: Oct 2023
Location: Travelers Rest
Posts: 21
M.O.C. #33434
|
IW60 Hot Water Issues
Update,
We never got it to be really hot to the point of needing to add cold water to temper the temp down. Now, we just got back from an out of country trip, tried to showered and back to square one. No hot water, ignitor goes on and off, lights 3 times and then quites.
So, still questioning a fuel pressure regulator issue or a water pressure issue. Thoughts????
|
|
|
09-18-2024, 03:02 PM
|
#25
|
Established Member
Join Date: Oct 2023
Location: Travelers Rest
Posts: 21
M.O.C. #33434
|
IW60 Hot Water issues
If anyone wants to call and discuss, you can find me on Facebook Messenger, Shayne Mitchell and I'll give you my phone number. I also have a FB page "I love Fishing Edisto", you can message me there as well.
|
|
|
09-20-2024, 08:09 AM
|
#26
|
Established Member
Join Date: Oct 2023
Location: Travelers Rest
Posts: 21
M.O.C. #33434
|
1060W On Demand Hot Water Heater
Ok, well now when trying to fire, I hear the ignitor, it attempts 3 times and quits, I have an E1 Code on the temp screen in the camper. Also, I noticed that the blowers rpm's go up and down. Then when it quites, the blowers go to a high speed until I guess the "cool down" cycle is completes and shuts off. I just need to figure out if it's a fuel regularor issue ( smell propane while it's trying to ignite and it does briefly ignites and goes out), a water pressure issue ( really don't hink it's that. Help if you can.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|