Quote:
Originally Posted by RipNC
Boomer,
it appears that the wire on top of the line that goes to the pump is, in fact the wire to the 12v side of your panel.
|
I disagree. The line one the bottom of the new 80 amp breaker is from the battery. The two lines on the top of the breaker are the ones going UP to the hydraulic system and the one going DOWN to into the hole in the bulkhead and leading off to the converter buss.
Yes, if the 80 amp CB is OFF (I have no idea why one would do that) and shore power is present, the converter will be feeding 12V back on the top post of the 80 amp breaker. But it will only go to the hydraulic system, not the battery.