View Single Post
Old 02-28-2022, 07:10 AM   #12
Cat320
Montana Master
 
Join Date: May 2006
Location:
Posts: 1,696
M.O.C. #5751
Here's how to lube and help to avoid rust on the dump T handles:

1. Empty all tanks.
2. Turn the T handle so the handle axis is horizontal.
3. Drill a small hole above the shaft, into the section where the sliding gate is, only large enough for a for a lube spray rod.
4. Put the sprayer in the hole, spray lube, move handle in/out, repeat.
5. Temporarily seal the hole with a short screw that is slightly larger than the hole.
6. To lube again, remove screw, lube, reinsert screw.
Cat320 is offline   Reply With Quote