[Glenn the fifth]

Hello all. I was hooking up yesterday on the last day of vacation. After getting the truck hooked up and doing the pull test I hit the auto retract just like always. As the legs start coming up I looked down and saw that the front left landing gear foot was still sitting there on the pad no longer attached to the hydraulic ram. It had come completely loose. I then checked the other 5 and found 3 of them pretty loose. I obviously got real lucky and I would hate to lose one of these 2-3 pound metal disc going down the road! It is a 15/16 size bolt holding them on with a washer and two rubber "grommets". If you have level-up, recommend you add these to your checklist. -Glenn