Quote:
Originally Posted by hemiallen
Thank you all, sounds like I'll not try and change my order.
Tom, is there an article / post on the added switching you did, sounds like something I should consider doing down the road.
Allen
|
There is a little information on the triggers in the owner’s manual. Make sure you get the manual for the Global Connect version of the IN•Command. I used the iN·Command to trigger a relay to put power to the air compressor. If you take the cover off the iN·Command in the basement, there are 4 blank connections to use for the triggers. Then you have to go into the settings on the control panel inside & enable them. Pretty simple process if you’re at least a little mechanically & electronically inclined.