Quote:
quote:Originally posted by Redrover98
I would like to thank everyone for the quick replies. It puts my mind at ease. I knew about opening the cylinder valve very,very slowly.
ONTMONT, The flow arrow was the first thing I checked on the new regulator. The only thing I can figure is that the gas leaving the standby tank regulator is only about 1.8 psi and then it goes through the switchover regulator. There may not be enough pressure to pass through the second regulator. The red regulator may have a higher output psi.
Thanks again for the help.
Dee
|
You're probably correct there. Seems my red regulator had a sticker on it; 18 PSI.