Quote:
Originally Posted by Daryles
Sail switch is good.
I would swap the 15A black self resetting fuse with a regular blue one.
There was a time when there was a bad batch of control boards out there. However they only went bad in extream cold below freezing temperatures.
Put a hair dryer blowing on the control board to bring it back to life. If you have to replace the control board i would go with a dinosaur board.
|
Quote:
Originally Posted by Mlpve6229
the fuse that feed the furnace is a auto reset fuse and it will trip when the fan starts and will reset after a moment or two so its hard to trouble shoot. I replaced the fuse with a different fuse and the furnace works properly.
|
Ours didn’t come with a resettable fuse so I didn’t think of that…but that’s sound advice. OP should at least check to see if that’s the fuse he has before digging in to other things.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana HC 305RL / HW Progressive EMS
2015 RAM 3500 Laramie Longhorn Crew Cab 4x4 DRW / Demco Recon Hitch on RAM Puck Ball
