View Single Post
Old 10-28-2019, 04:16 PM   #16
CADman_KS
Montana Master
 
Join Date: Oct 2019
Location: Hesston
Posts: 735
M.O.C. #25060
Quote:
Originally Posted by bshgto View Post
You can take it off and throw it away then connect the pipes together with a one way flow brass fitting brass fitting then put the back flow anti siphon fitting on the hose outlet in the conveyance center and this wont do any damage if it leaks, this is how I dealt with it.

Replace original plastic fitting with the stronger brass anti siphon valve but still risk the leak or potential flood in the camper

Although a code requirement in some states/counties especially with well systems my plumber says a backflow condition to the public water supply would be extremely rare and never heard of it happening in his 39 year career.

Or just cap the pipes off altogether under the sink with Shark Bites caps. Do you think that little nozzle in the tank really dose anything to clean out the tank any more than adding more water to the tank and dumping again which is what you should be doing anyway.
I do like the idea of using this style of vacuum breaker as opposed to the one that's in the unit.



However, wouldn't it make sense to put this on the end of the hose that attaches to the water supply side? That way, there is never any water that is spilled in the convenience center. And, if there was a sudden backflow condition, the breaker would pop, and no water should be pulled into the water supply. Maybe I don't understand the "fix" that was outlined in this post, and that's entirely possible.

ON EDIT: Actually, a fair number of the campsites that we've stayed at have these type of vacuum breakers on the water spigots already, and they are kind of a nuisance because they spew water all over you when you turn the faucet off. If I was to put one of these in the convenience center, I don't want that thing spewing water every time that I turn the hose off.

The one reason for leaving it in there is when you sell. I would be the prudent thing to make sure that the unit is to code when you sell it. If you kept the valve, you could always put it back together when you sold it.

As for just dumping (no pun intended) the power flush sprayer system all together, it does seem like something that should work fairly well, and at this point, I'm not game to disable the whole thing just quite yet...
CADman_KS is offline   Reply With Quote