Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jackel1959 · 11-09-2011, 05:53 AM

I have used a brand called "DALYS" wood stain, Fruitwood 49 Product#104049 and it matches perfectly. You will need to apply 2-3 coats and then a satin poly finish, but I am sure you will be pleased with the results.

Shortly after we bought our rig we damaged the stile on one of the cabinets. I had to sand it completely down to bare wood and refinish it. It is a perfect match and you can not even tell it was ever repaired. When adding shelves, doors and trim, I have used red oak for the material and the same stain and finish for the same excellent results.

Jack

11-09-2011, 05:53 AM	#7
jackel1959 Montana Master Join Date: Nov 2004 Location: Oak Harbor Posts: 1,530 M.O.C. #2471	I have used a brand called "DALYS" wood stain, Fruitwood 49 Product#104049 and it matches perfectly. You will need to apply 2-3 coats and then a satin poly finish, but I am sure you will be pleased with the results. Shortly after we bought our rig we damaged the stile on one of the cabinets. I had to sand it completely down to bare wood and refinish it. It is a perfect match and you can not even tell it was ever repaired. When adding shelves, doors and trim, I have used red oak for the material and the same stain and finish for the same excellent results. Jack __________________ Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods. 2021 RAM 3500 Laramie...."LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.