Quote:
Originally Posted by darmock667
My window unit had a small window and an escape window. While taking the screws out of the existing frame I noticed the front window was pushed forward and it appeared that the center screw (which is pointed) was actually in contact with the glass of the rear window that broke along the top. Poor QA. The center screw needs to be between the two panes of glass. Not liking sharp pointy stuff near the edges of these windows I put a small piece of rubber where the top screw penetrates the frame. This has the effect of keeping the sharp end of the screw away from the glass.
I went around and checked all of the windows and found one other window where the screw was in contact with the glass and re positioned it and added some rubber around the screw
Tom
|
Can you take a pic and maybe draw an arrow to the places where the screws were off and contacting the glass?