|
On our prior truck I installed a plug in rear side of the wheelwell inside the bed area, driver's side. It was easily reachable from outside the bed. You can buy the wiring kit all ready to install. Front or rear side of wheelwell, probably doesn't matter. Just make sure wherever you put it that there's enough cord to make the tightest turn you are likely to make.
I agree with Gyro about using the fanmate instead of the standard maxxair cover over a fantastic fan. Whether it has the rain sensor is really irrelevant. With the cover you don't worry about the rain, no need for the fan cover to close and shut the fan off.
Gyro, let me know what setting you settle on for your ITBC. I think I've finally settled on 8.0 for ours.
|