|
Re initialized the thermostat and checked all the settings. Apparently if fan is set to Lo or High, A/C fan will circulate air without compressor coming on. If you don't want the A/C to circulate air, setting fan to auto will only allow furnace to move air in furnace mode. Our thermostat fan was set on High which caused A/C fan to run too. Also now know we have a single zone thermostat with heat strips in front A/C. Today was the first time we turned on furnace since dealer walk through. Don't get to use the furnace much here in AZ as cooling is the bigger issue! Thanks for the feedback.
|