Red Flashing LED
Sorry I haven't replied to some of these messages, my son's family relocated home from being stationed in England for three years and we have been spending most of our time helping get them settled.
I traced the circuit to my refrigerator after removing my fuse panel from the wall and tightening loose connections (both 110v and 12v). I was surprised at how many connections required at least 1/2 to 3/4 turn and one of the 110v connections just over a full turn. I wonder if this is due to vibration when the trailer is moving or just faulty workmanship at the factory.
The cause of the red flashing LED ended up being a fuse. The fuse checks good with an ohm meter but still would cause the LED to flash intermittently. I replaced the fuse and the problem is cured.
Thanks to everyone who replied to the post. This is our first RV in more than 30 years and we are having to relearn quite a bit. We had a 29' Streamline bumper pull trailer in the 1980s and everything has changed a lot!
|