|
Bent Frame
2007 2955RL has a bent frame just above the Morryde suspension attachments on both sides of the trailer. It looks to me like the reinforcement tubing that was welded in place along the bottom rail of the I-beam is insufficient to resist the added torsional pressure applied when turning due to the lower spring attachment on the Morryde. I've found that Keystone replaced this tubing with two v-shaped gussets welded to the webbing above the suspension hanger. They did this the very next year, indicating to me that they realize this was a problem area. Anyone out there with a similar problem? Any info would be greatly appreciated.
Lee
|