[scottz]

Originally Posted by Kyle and Lisa

What brand is that and how much did it cost ? The H&S that I have seen are rubber.

YJ Racing, $146. See post #6. The boots are silicon. It was a little difficult to get on due to the tight quarters you are working in; any pipe would have the same issue. One note: the sensor port on the OEM pipe is on the back (facing driver), the sensor port on the YJ pipe is on the top. No problem, there is plenty of wire to move the sensor to the top. If you try to position the YJ pipe with the sensor port on the back, it will never go.

Be careful taking the sensor out of the OEM pipe, it is real easy to break off the little tab that locks it in place. Don't ask me how I know, but a new sensor is $24 at Ford. The sensor does not lock perfect in the YJ pipe; I used a little dab of RTV silicon to secure the tab (do not put RTV on the sensor).

This is not an endorsement, it works for me (have several thousand miles on it) and the price was great. Do your own research and make a decision.