Quote:
Originally Posted by Daryles
Here are the Jamboni videos that show the location of the wiring.
Someone else mentioned above about if the current wiring is stapled it will be very difficult/impossible to use the existing wire as pulls.
Some people have used the vent pipes to run the wiring through. If you use #4 stranded wire it will be easier to pull (flexible).
Picture shows behind my control panel and behind the basement walls.
Jaboni/Montana solar prep
https://youtu.be/mhE9pSum_nA
Jaboni/Montana solar install
https://youtu.be/gn3BIWaSb4c
|
Good hell! I thought the wiring on ours was bad.....