[rohrmann]

This is the text in Lippert's Lipsheet 0291:

LCI HYDRAULIC OPERATION FLUID RECOMMENDATION
Operation Conditions
1. Above Freezing
NOTE: Operation at air temperatures routinely above 0°C (32°F). *
A. Dexron 3/Mercon ATF
B. Mercon 5 ATF
C. Dexron 6 ATF
D. PetroBlend (Mason City, IA) PHO 0022S (synthetic group 3 base blend)
E. Bellman all temp 22 (Bremen, IN)
F. Or any ATF or hydraulic fluid with a pour point lower than -42°C (-45°F).
*Covers most initial OEM fills
2. Below Freezing
NOTE: Operation at air temperatures routinely below 0°C (32°F).
A. Mobil 1 full synthetic ATF
B. Royal Purple full synthetic ATF
C. Valvoline full synthetic ATF
D. Amzoil full synthetic ATF
E. PetroBlend (Mason City, IA) PHO 0022S (synthetic group 3 base blend)
F. Bellman all temp 22 (Bremen, IN)
G. Or any ATF or hydraulic fluid with a pour point lower than -42°C (-45°F)
H. Multivis (all temperature) iso 22 hydraulic fluid
I. Or any ATF or hydraulic fluid (conventional or synthetic) with a pour point lower than
-46°C(-50°F).
3. Extreme Cold
NOTE: Operation at air temperatures routinely below -18°C (0°F).
A. Kendall Glacial Blue
B. Benz oil (Milwaukee, WI) Flomite 530
Or any conventional or synthetic ATF or hydraulic fluid with a pour point less than -57°C (-70°F) and viscosity
less than 2850 cP @ -40°C (-40°F ).
Do not use ATF-TYPE F fluid as it will not allow the seals to work properly.