Quote:
Originally Posted by Daryles
My High Pointe Microwave quit. Suspected fuse. Found a couple of YouTube videos showing how to remove the top front cover and replace the fuse. Take a butter knife and run it under the top edge. Apparently where the 2 screws go down from the top, there is some metal burrs that protrude through the screw holes into the plastic tab that cause it to hang on. Run the butter knife under the screw holes releases the top front cover. PULL HARD straight towards you.
Microwave door switches
https://www.facebook.com/groups/Mont...8402346674091/
Amazon: KW3A need 1 (comes with 2 switches in the kit), KW3AT-16 need 1
Black upper switch P/N KW3AT-16 normally open.
Grey upper switch P/N KW3A normally closed
Grey lower switch P/N KW3A normally open
Pay attention to which one goes where.
Eventually I replaced the HighPointe with a Whirlpool WMH31017HZ04
Microwave only. We never used the convection oven. |
Daryl, you da man!!! Did what you suggested and found the 20 amp fuse was blown. I will try to find one on the road tomorrow. Only problem now is what made the fuse blow…..