Yup! Ours was improperly drilled and the mounting hole in the door frame is incorrectly aligned. Has been that way since the RV was delivered new. I've engineered and lubed it to make it easier to close but the permanent fix with a true micro switch is a future project. 
Quote:
quote:Originally posted by astrungis
I had the same problem on my FB3900. It wasn't that the button would not depress - it was because the screen door hinge didn't line up properly to the button. The hinge would sometimes slip to the outside of the button and make a snapping noise when you tried to close the door. I added a piece of 1/4" plywood to the door hinge until I was able to get it to the dealer. I told the dealer that the hinge and button don't line up. They removed the button and moved it outboard about 1/2". The mounting plate covers the partial old hole. Now I'm good.
|
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|