|
Whether you use the remote or not you need power to the remote receiver, I would check that as well, there should be some in line fuses to the receiver. Problem might be there since you indicate all other 12V is working. Also turn off the 2 main breakers and see if you still have 12V to the inside lights, that will take the converter out of the equation and will tell you if you actually have 12V connection to the converter through the 2 Circuit breakers. I think the right one first then a jumper to the left one and then on to the cut out switch and converter etc...
The power wire to the hydraulic pump should be off the circuit breaker on the right.
|