10-23-2011, 06:54 AM
|
#9
|
Montana Master
Join Date: Sep 2008
Location: Bangor
Posts: 770
M.O.C. #8816
|
Quote:
quote:Originally posted by swanny
Quote:
quote:Originally posted by snfexpress
A teflon plate for your kingpin.
We like the sewer solution but also carry a 10' section of regular sewer hose.
Sodium Hypochlorate from WalMart to sanitize the fresh water system.
Quick connects for your water hoses - brass.
We carry a 50' extra water hose and 25' Anaconda extension (50 amp) cord and stow in front compartment.
Before you start packing stuff in though, take plenty of photographs of the wiring in the front compartment, behind the Convenience Center and under the hallway stairs. Have the dealer tighten all of the 110v connections on the breaker panel.
I would suggest this, I pulled my panel and checked all wires. What I found was some loose connections, but, the biggie was connections that had very little insulation removed and the insulation was actually under the screw!!! So the insulation was tight and the copper was loose. I found this on four connections.
kevin
|
|
|
|
|