[scottz]

I have not installed them, but have done some research. They will not work with your InCommand system. The Sealevel system uses proprietary communications; you will need to install the Sealvel panel.

You will need to drop the coroplast to install the new sensors on the outside of the tanks and the wiring (fairly simple). You could use the existing wiring by removing it from the existing sensors and InCommand; but probably more effort than pulling a new cable. The Sealevel website will guide you on which sensors you need depending on the size of your tanks.

In the end, I agree with Bob, decided it was not worth the trouble and expense and shelved the idea. I know when to dump the tanks.