Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 03-06-2019, 08:53 AM

Since I installed mine, I went in a different direction. I have a piece of 1/2" wood which is 4" inch wide and 6" tall that is glued/screwed to a block of wood at the bottom. The face of the 1/2" wood is padded with felt and rests flat against the freezer drawer. This is held in place by a long screw on the bottom block that screws into the wood base that the fridge sits on. Takes less than a minute to install or remove. Never had the French doors on the fridge open, but we do wrap them together at the handles with a padded wire twist tie that is sold at lowes and home depot.

03-06-2019, 08:53 AM	#6
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	Since I installed mine, I went in a different direction. I have a piece of 1/2" wood which is 4" inch wide and 6" tall that is glued/screwed to a block of wood at the bottom. The face of the 1/2" wood is padded with felt and rests flat against the freezer drawer. This is held in place by a long screw on the bottom block that screws into the wood base that the fridge sits on. Takes less than a minute to install or remove. Never had the French doors on the fridge open, but we do wrap them together at the handles with a padded wire twist tie that is sold at lowes and home depot. __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.