I took our doors down and made a small mod. Notice the slot in the metal on top of the door (2). At the closed end of the slot, just beyond the metal, drill a small hole and install a wood screw allowing about 1/4 inch to stand above the wood. One at each metal slot. Reinstall the doors, making sure to snap the plastic keepers into the bottom tracks, takes some force. Loop a nylon tie strap around the carrier stud and the newly installed screws, pull it tight. Clip off excess. Install a cup hook inside the closet near the wall, and another outside the door near the wall. Use bungee cord to hold doors open while traveling. This has resolved our problem.
|