Quote:
Originally Posted by REDBEV MONTANA
Feel my entry door needs to be adjusted. Door is rubbing at top left hand corner in the curved area. Makes it hard to open and close and it has rubbed the paint off. Doesn't appear, that I can see, to be slotted holes at the hinges to be able to adjust. Thinking there has to be some way to adjust? I am sitting level so that is not the problem. Anyone else had this problem?
|
I am sure you resolved this, based on the date. We recently had a similar experience with the screen door, resolved it by bending the hinges back to their original 90 degree state. Some how they got to be less than 90 degrees, which pushed the edge of the door toward the frame, binding the door. It doesn't take much to throw the door off position, I would estimate my re-bending the hinges was about 3 or 4 degrees of bend back to 90 degrees. I hope this helps.