[bw2]

quote:Originally posted by dieselguy

All you need to do is install 12V blocking valves (in my case 2), have a couple of hydraulic hoses made, and run wire to rocker switches in say your entry closet. The valves are made by Parker and can be bought at Graingers or about any commercial supply house. All the switches and wiring can be had at any auto parts store. Any local hydraulics shop or implement dealer can make up your hoses. I secured my valves to the bulkhead behind the slide pump and plumbed them inline with the existing manual control manifold and lines. It can all be had for @ $300 - $350. I'll try and get some photos for a visual along with part numbers. I too cannot figure out why Keystone doesn't go a little extra and step up in this area with its competitors.